In order to offer you the best possible experience, we suggest that you accept the deposit and reading of cookies and the use of technology necessary for their proper functioning:
Non-oriented fully processed high strength grades have not only guaranteed magnetic properties but also guaranteed mechanical properties. Typical for these grades are higher strength values compared with the standard grades, both at room temperature and at higher temperature operating conditions. Full magnetic characterisation curves at different frequencies are available on request.
These high strength grades withstand stronger mechanical forces than the standard grades. They are therefore an excellent compromise when a combination of high mechanical strength and low magnetic losses is required.
High strength values, combined with low losses and good permeability, make these grades particularly suitable for high-speed rotating machines.
The above properties are obtained without heat treatment after stamping. The material as supplied possesses all the required magnetic properties.
Old brand names | |
---|---|
M 470YS-50 A AM FCE | HLE50 |
M 530YS-65 A AM FCE | HLE65 |
M 470YS-50 A AM FCE | |
---|---|
Old brand names | HLE50 |
M 530YS-65 A AM FCE | |
---|---|
Old brand names | HLE65 |
Before side trimming | Side trimmed | Slit coils | Sheet length 400 to 2500 mm | |||||
---|---|---|---|---|---|---|---|---|
Min width | Max width | Min width | Max width | Min width | Max width | Min width | Max width | |
M 470YS-50 A AM FCE | 1030 | 1230 | 600 | 1200 | 250 | 600 | 400 | 1100 |
M 530YS-65 A AM FCE | ||||||||
Before side trimming | Min width | 1030 |
---|---|---|
Max width | 1230 | |
Side trimmed | Min width | 600 |
Max width | 1200 | |
Slit coils | Min width | 250 |
Max width | 600 | |
Sheet length 400 to 2500 mm | Min width | 400 |
Max width | 1100 |
Before side trimming | Min width | 1030 |
---|---|---|
Max width | 1230 | |
Side trimmed | Min width | 600 |
Max width | 1200 | |
Slit coils | Min width | 250 |
Max width | 600 | |
Sheet length 400 to 2500 mm | Min width | 400 |
Max width | 1100 |
Conventional density (kg/dm³) | Max loss (W/kg) at 50 Hz at 1.5 T | Min polarisation (T) at 5000 A/m | |
---|---|---|---|
Guaranteed | Guaranteed | ||
M 470YS-50 A AM FCE | 7.60 | 4.7 | 1.60 |
M 530YS-65 A AM FCE | 5.3 | 1.62 |
Multiply the values in W/kg by 0.4536 to obtain the values in W/lb.
Conventional density (kg/dm³) | 7.60 | |
---|---|---|
Max loss (W/kg) at 50 Hz at 1.5 T | Guaranteed | 4.7 |
Min polarisation (T) at 5000 A/m | Guaranteed | 1.60 |
Multiply the values in W/kg by 0.4536 to obtain the values in W/lb.
Conventional density (kg/dm³) | 7.60 | |
---|---|---|
Max loss (W/kg) at 50 Hz at 1.5 T | Guaranteed | 5.3 |
Min polarisation (T) at 5000 A/m | Guaranteed | 1.62 |
Multiply the values in W/kg by 0.4536 to obtain the values in W/lb.
Multiply the values in W/kg by 0.4536 to obtain the values in W/lb.
Guaranteed mechanical properties:
Direction | Re (MPa) | Rm (MPa) | A80 (%) | |
M 470YS-50 A AM FCE | T | > 470 | > 580 | > 15 |
M 530YS-65 A AM FCE | > 480 | > 590 |
The following table specifies the typical mechanical properties:
Direction | Re (MPa) | Rm (MPa) | A80 (%) | Re/Rm | HV | |
---|---|---|---|---|---|---|
M 470YS-50 A AM FCE | T | 485 - 525 | 605 - 645 | 20 - 30 | 0.78 - 0.83 | 205 - 235 |
M 530YS-65 A AM FCE | T | 495 - 545 | 610 - 660 | 20 - 30 | 0.80 - 0.85 | 205 - 235 |
Direction | M 470YS-50 A AM FCE | |
---|---|---|
Re (MPa) | T | 485 - 525 |
Rm (MPa) | T | 605 - 645 |
A80 (%) | T | 20 - 30 |
Re/Rm | T | 0.78 - 0.83 |
HV | T | 205 - 235 |
Direction | M 530YS-65 A AM FCE | |
---|---|---|
Re (MPa) | T | 495 - 545 |
Rm (MPa) | T | 610 - 660 |
A80 (%) | T | 20 - 30 |
Re/Rm | T | 0.80 - 0.85 |
HV | T | 205 - 235 |
These standard grades are available non-insulated or varnished with any of the coating types described in data sheet D28.
Any questions?
Ask them via our contact form on
https://industry.arcelormittal.com/getintouch
All details provided in the ArcelorMittal Flat Carbon Europe S.A. catalogue are for information purposes only. ArcelorMittal Flat Carbon Europe S.A. reserves the right to change its product range at any time without prior notice.